Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterNikro Air Quality & Sanitizing in Schertz: What to Know First
We provide independent Nikro air quality and sanitizing service in Schertz, with most jobs scheduled within a few days and completed in a single visit. A typical Nikro sanitizing or odor remediation runs $340-$780 for a whole-home system, and we put that price in writing before any panel comes off. This page is for Schertz homeowners who own Nikro air scrubbers, UV systems, or whole-house purifiers and need documented results, not a sales pitch. If your unit is cycling odors, showing reduced airflow, or the indicator light has changed state, we can diagnose it and show you exactly what we found. Call (830) 402-5110 for a free estimate.
How Nikro Products Fail - and How We Fix Them
- Nikro PS1000 and PS2000 portable air scrubbers develop clogged HEPA stages when used in Schertz’s high-pollen spring seasons, especially in homes near the Cibolo Creek watershed where cottonwood and oak load the intake. The motor labors, heat builds at the housing seam, and the unit trips thermal protection. We strip and photograph the filter bank, replace with Nikro-spec HEPA or verified equivalent, and test static pressure across the new stack before the unit goes back into service.
- Nikro UVC2000 and UVC3000 in-duct ultraviolet systems suffer quartz sleeve fouling from the hard water scale common in Schertz’s Edwards Aquifer supply. The UV-C output drops below the 40 microwatts per square centimeter threshold for effective coil sanitizing, but the LED indicator stays green because it’s wired to ballast voltage, not actual lamp output. We meter actual irradiance with a UVC radiometer, clean or replace the sleeve, and replace the lamp at 9,000 hours regardless of apparent brightness.
- Nikro APS2000 and APS3000 whole-house polarized media cleaners lose their carbon mesh contact strips where the 24-volt energizing circuit meets the frame. The symptoms look like a dead blower: no airflow change, no indicator light, but the mesh is actually floating at neutral charge and passing particles it should catch. We test continuity at the frame clips, replace the contact assembly with OEM or matched aftermarket, and verify field strength with a static detector before we leave.
- Nikro OdorBlaster ozone generators develop degraded corona cells when run in Schertz’s summer humidity above 65 percent relative, which is most afternoons from June through September. The ozone output falls below the 500 mg/hr specification, and the unit runs longer cycles without achieving oxidation. We pull the cell, photograph the ceramic erosion, quote replacement versus rebuild, and run a timed ozone decay test in a sealed chamber to confirm output before return.
- Nikro HEPA500 negative air machines used during local remediation work often arrive with damaged gasket seals from rough transport between job sites. The bypass air defeats the HEPA stage entirely, and the unit reads clean on the motor side while exhausting unfiltered air. We pressure-test the housing with a smoke pencil, replace the gasket set with closed-cell silicone rated for the temperature range, and document the seal integrity in the photo record.
Our Nikro Air Quality & Sanitizing Process
- 1
Call intake and scheduling. We confirm the Nikro model and serial number, the symptom you’re seeing, and whether the unit is still under manufacturer warranty. We schedule a window and name a technician.
- 2
On-site diagnostic with documentation. The technician arrives uniformed and identified, inspects the installed location, and uses a borescope or meter as indicated. We photograph the condition before touching anything.
- 3
Written scope and price. Haven Standard Clause 1: we deliver a written price for the complete job before work starts. No per-vent add-ons, no “once we’re in there” surprises.
- 4
Parts decision and service. We stock common Nikro consumables and carry OEM and quality aftermarket options. If the part is specialized, we show you the source and lead time before you commit.
- 5
Test, photo record, and sign-off. We run the unit through its full cycle, meter output where applicable, photograph the completed state, and deliver the documented photo record as a standard job deliverable.
- 6
365-Day Done Right Promise activation. The written guarantee goes into your file. If the symptom returns, we make it right.
BeforeAfterWhat Nikro Air Quality & Sanitizing Costs in Schertz
These are whole-system prices, agreed in writing before work starts:
| Service | Typical Range |
|---|---|
| Nikro HEPA filter bank replacement (PS1000/PS2000) | $180-$290 |
| Nikro UVC lamp and quartz sleeve service (UVC2000/3000) | $260-$420 |
| Nikro polarized media contact repair (APS2000/3000) | $220-$340 |
| Nikro ozone cell rebuild or replacement (OdorBlaster series) | $340-$580 |
| Nikro whole-system sanitizing with photo documentation | $340-$780 |
What moves the price: accessibility of the installed unit, whether the ductwork requires negative-pressure extraction before sanitizing, and whether the job reveals secondary contamination we document and discuss before proceeding. Every estimate is free. Call (830) 402-5110.
Why Schertz Homeowners Call CleanRun Air Duct Cleaning Schertz for Nikro Work
We’ve been working Schertz long enough to know which builder spec’d Nikro equipment in the subdivisions off Roy Richard Drive and which older homes near FM 3009 have units that haven’t been opened since installation. Tomas Reyes and our crew service Nikro alongside Lennox, Trane, and Carrier systems, so we’re not guessing when a multi-brand setup isn’t communicating. The 365-Day Done Right Promise is in writing on every job, not a verbal assurance. The photo record shows what was there and what we did. And Haven Standard Clause 3 means the technician who arrives has been verified, uniformed, and named to you before the truck turns onto your street. The before photo does the talking. I just bring the camera.
FAQs
No. As an independent Nikro service provider, we use parts and practices that preserve warranty coverage where the unit is still within the manufacturer’s period. We document serial numbers, service dates, and parts sources in your job record so you have evidence if a warranty question arises later. If your unit is under warranty and the repair should be factory-covered, we’ll tell you before we start. Call (830) 402-5110 to discuss your specific unit.
The green indicator on Nikro UVC2000 and UVC3000 models shows ballast voltage, not germicidal output. We’ve measured lamps that glow faintly but deliver less than 10 percent of effective UVC dose due to quartz sleeve fouling or end-of-life degradation. We test with a calibrated UVC radiometer and show you the reading. If the output is below threshold, we clean or replace and retest. Call (830) 402-5110 to schedule a metered check.
Replace when the repair exceeds 60 percent of replacement cost, parts are discontinued, or the unit never matched your square footage to begin with. We see this in Schertz homes where a PS1000 was installed in a 3,500-square-foot house and runs continuously without achieving air turnover. We’ll measure your space, check the unit’s rated capacity, and put both numbers in writing. Call (830) 402-5110 for a free assessment.
Most residential Nikro air quality and sanitizing jobs in Schertz run two to four hours from arrival to final test. A straightforward HEPA filter change on a PS2000 might take 45 minutes; a full UVC system service with duct access and photo documentation takes longer. We schedule by the job, not the hour, and we don’t leave until the metered results are in range. Call (830) 402-5110 to book a window.
The $79 coupon model typically covers a brief vacuum at the register, not the plenum, not the duct runs, and not the equipment service. We quote whole-system work with a written scope, photograph every run, and back it with a 365-Day Done Right Promise. The price you agree to is the price you pay. If you have a competitor’s written estimate, we’ll provide a free second opinion under Haven Standard Clause 2. Call (830) 402-5110.
Written by Tomas Reyes, Owner & Lead Technician, CleanRun Air Duct Cleaning Schertz at CleanRun Air Duct Cleaning Schertz, serving Schertz and nearby areas.