Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Air Quality & Sanitizing in Schertz: What to Know First
We provide independent Abatement Technologies air quality and sanitizing service in Schertz, with most scheduled jobs completed in a single visit and a written price delivered before any work begins. A typical Abatement Technologies PREDATOR 750 or HEPA-AIRE system in a Schertz home runs $340-$620 for full mold or bacteria sanitizing treatment, depending on duct run count and whether the plenum requires separate access. We’re not here to match a coupon; we’re here to show you what the borescope found and fix it under a written guarantee.
This page is for Abatement Technologies equipment owners in Schertz, Cibolo, and the I-35 corridor who want to know what sanitizing actually involves, why their unit needs it, and what they’ll pay before anyone opens a panel. Call (830) 402-5110 for a free estimate.
How Abatement Technologies Products Fail - and How We Fix Them
- PREDATOR 750 portable air scrubbers develop biofilm buildup on the blower wheel and pre-filter housing when run continuously in high-humidity Schertz crawlspaces. The wheel looks clean from the outside, but the camera shows a slimy layer at the hub that recirculates bacteria through the ductwork. We remove the wheel assembly, treat with EPA-registered sanitizer, and replace the pre-filter with a Guardsman MERV-11 rated for microbial load.
- HEPA-AIRE SAH2 series negative-air machines lose seal integrity at the HEPA filter gasket after 18-24 months of vibration from Texas limestone subgrade. The leak isn’t visible until you pressure-test; meanwhile, untreated air bypasses the filter entirely. We source the correct Abatement Technologies OEM gasket or a cross-referenced Nikro equivalent, verify seal with a smoke pencil, and document the test on camera.
- PAS2400 portable showers and containment units used in local restoration work often arrive at our shop with contaminated duct adapters that previous crews never broke down for cleaning. The flexible adapter tubing traps construction dust and moisture, creating a mold reservoir. We disassemble every adapter, run a Rotobrush through the corrugated sections, and apply a quaternary ammonium treatment that won’t degrade the Abatement Technologies vinyl.
- Abatement Technologies HEPA vacuum systems (H2200 and H2300 series) suffer motor housing corrosion in Schertz’s spring allergy seasons when operators empty wet debris and reseal without drying. The corrosion flakes into the airstream and distributes as a metallic particulate. We pull the housing, media-blast the corrosion, coat with a food-grade epoxy, and verify zero particle count before return to service.
- UV light retrofits on Abatement Technologies air handlers fail prematurely when installed at the wrong angle to the evaporator coil. The 254nm lamp needs direct line-of-sight to the coil face; a 15-degree deviation cuts effective sanitizing by 40 percent. We measure the geometry with a digital protractor, reposition the lamp bracket, and use a UVC radiometer to confirm 100 microwatts per square centimeter at the coil surface.
Our Abatement Technologies Air Quality & Sanitizing Process
- 1
Written price first. We inspect the Abatement Technologies equipment, identify the model and serial, and deliver a written scope and price before any panel comes off. Haven Standard Clause 1.
- 2
Borescope documentation. Our technician inserts a camera into every accessible duct run and photographs the interior condition. The before photo does the talking. I just bring the camera.
- 3
Component-specific diagnosis. We pressure-test seals, measure UVC output, and inspect blower assemblies for the failure modes specific to your Abatement Technologies series. No generic “duct cleaning” without knowing what the equipment is built to handle.
- 4
OEM or verified-crossover parts selection. We stock Abatement Technologies gaskets, Guardsman filters, and Nikro-compatible adapters. If an OEM part is backordered, we show you the crossover spec sheet and your approval before substitution.
- 5
Sanitizing treatment and mechanical restoration. Negative-pressure extraction (suction that pulls debris out rather than pushing it deeper), followed by EPA-registered antimicrobial application, seal replacement or repair, and UVC repositioning if applicable.
- 6
After documentation and test. We photograph every treated run, deliver the photo record to you, and run a final particle count or smoke-pencil verification. The 365-Day Done Right Promise attaches in writing before we leave.
BeforeAfterWhat Abatement Technologies Air Quality & Sanitizing Costs in Schertz
These are real ranges for Abatement Technologies equipment we’ve serviced in Schertz, Selma, and the FM 3009 corridor. Prices are per system, not per vent, and include the documented photo record.
| Service | Typical Range | What Moves the Price |
|---|---|---|
| PREDATOR 750 / HEPA-AIRE blower and filter sanitizing | $340-$480 | Number of duct runs, plenum access difficulty, filter count |
| HEPA-AIRE SAH2 gasket replacement and seal verification | $280-$420 | Gasket material (OEM vs. Nikro crossover), smoke-test complexity |
| PAS2400 adapter breakdown and antimicrobial treatment | $220-$360 | Adapter count, contamination level, drying time required |
| H2200/H2300 motor housing corrosion remediation | $380-$620 | Corrosion extent, epoxy coating needed, particle-count verification |
| UVC lamp repositioning and radiometer verification | $180-$290 | Bracket fabrication, lamp replacement, access to coil |
| Full-system mold or bacteria sanitizing with air scrubber deployment | $520-$780 | Square footage, containment setup, post-treatment lab clearance if requested |
Every price is written and agreed before work starts. If you have a competitor’s written estimate for the same Abatement Technologies equipment, we’ll deliver a free second opinion in writing. Call (830) 402-5110.
Why Schertz Homeowners Call CleanRun Air Duct Cleaning Schertz for Abatement Technologies Work
We’ve been working Schertz long enough to know which neighborhoods built in the 2015-2020 boom have flex duct that sags at the first elbow, and which older homes near Main Street still have galvanized trunk lines that corrode from the inside out. That context matters when we’re routing Abatement Technologies negative-air equipment through your system.
Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews. Tomas Reyes, our owner, holds a Texas air conditioning contractor license and has pulled ductwork in everything from Queens walk-ups to Schertz ranch homes. We also service Lennox, Trane, and Carrier equipment, which means we understand how your Abatement Technologies sanitizing gear interacts with the whole HVAC ecosystem, not just its own components.
The 365-Day Done Right Promise is written on every job. The photo record is delivered before we leave. And the price you approved is the price you pay.
FAQs
No, provided the work is performed by a qualified technician using manufacturer-compatible parts and EPA-registered chemicals. As an independent Abatement Technologies service provider, we document every chemical and part used so your warranty record stays clean. If a warranty claim ever arises, you have our written scope and photo record to support it. Call (830) 402-5110 if you need documentation for a pending claim.
We deliver a documented photo record of every duct run, before and after, as a standard deliverable on every visit. You see what the borescope saw at 9:00 AM and what it saw at 2:00 PM. If the after photo doesn’t show clean metal and intact seals, we don’t present the invoice. Haven Standard Clause 2: Documented Accountability.
Replacement makes sense when the equipment is over 10 years old, the repair exceeds 60 percent of replacement cost, or the model has been discontinued and parts are unobtainable. For most PREDATOR and HEPA-AIRE units under 8 years in Schertz, remediation and sanitizing is the better value. We’ll tell you straight if the math favors replacement, and we’ll put that in writing too.
A single PREDATOR 750 or HEPA-AIRE unit typically takes 3-4 hours from setup to final test. Full-system mold treatments with containment and air scrubber deployment run 6-8 hours. We schedule by the job, not by the hour, so the crew stays until the particle count or smoke test passes.
The $79 coupon model relies on arriving at your door and finding “problems” that multiply the bill. We don’t operate that way. Our price is written before work starts, per system, with no per-vent add-ons. The difference is documented labor, professional-grade equipment you can verify (Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, Guardsman), and a guarantee that survives past the driveway. Call (830) 402-5110 for an exact quote on your equipment - estimates are free.
Written by Tomas Reyes, Owner & Lead Technician, CleanRun Air Duct Cleaning Schertz at CleanRun Air Duct Cleaning Schertz, serving Schertz and nearby areas.