Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Duct Repair & Sealing in Schertz: What to Know First
We provide independent Abatement Technologies duct repair and sealing in Schertz with written prices delivered before any work starts, typical jobs completed in one scheduled visit, and a 365-Day Done Right Promise backed in writing. Most Abatement Technologies systems we see in Schertz homes fall into the PREDATOR portable air scrubber line or the BD2K series negative air machines, both of which move serious CFM through duct connections that weren’t built for Texas thermal cycling. If you own an Abatement Technologies unit tied into your home’s HVAC or used for restoration work that became permanent, we can seal the duct interface, repair flex runs, and document what we found. Call (830) 402-5110 for a free estimate with a written price attached.
How Abatement Technologies Products Fail - and How We Fix Them
- PREDATOR 600/800 series: cracked poly hose barbs at the plenum connection. These units ship with 2-inch or 3-inch barbed fittings designed for temporary negative-pressure hose, not permanent hard-pipe or flex-duct marriage. In Schertz, where attic temperatures hit 140°F in July and drop below freezing in January, the polypropylene fatigues at the barb root. We cut back to sound material, install a steel-reinforced transition collar, and seal with mastic rated for the temperature swing.
- BD2K-15 inlet collar separation from the main housing. The BD2K’s rolled-steel inlet flange is spot-welded at four points; vibration from the 1.5 HP motor loosens the spot welds over 18-24 months of continuous use. We don’t re-weld in the field, that voids the motor mount alignment. Instead we remove the collar, fabricate a slip-fit steel sleeve with a draw-band connection, and seal the joint with fiberglass-reinforced mastic. The unit breathes as designed, and the motor doesn’t fight itself.
- Flex duct collapse between Abatement Technologies HEPA500 and remote inlet. The HEPA500’s 250 CFM draw is modest, but when a homeowner or restoration crew extends the run with cheap vinyl flex beyond 25 feet, the negative pressure collapses the inner liner. We replace with insulated, wire-reinforced flex duct (R-6 minimum) sized to the unit’s static capability, support it every 4 feet, and terminate with a proper register boot rather than a taped cardboard patch.
- Abatement Technologies CAP600-UV: ductboard plenum rot at the UV penetration point. The CAP600-UV’s ultraviolet lamp assembly requires a 2.5-inch hole through the supply plenum. On ductboard plenums common in Schertz builds from 2005-2015, the UV ozone and condensate migrate along the foil facing, delaminating the board from the inside. We excise the rot, line the penetration with a stainless steel escutcheon, re-seal with water-based mastic, and relocate the lamp if the board thickness won’t support a clean mount.
- Cross-contamination from missing or degraded gasket at the Abatement Technologies filter housing. The PREDATOR and BD2K lines use a foam gasket between the HEPA filter frame and the blower housing. After 2-3 filter changes, the gasket compresses permanently or tears on removal. Untrained hands often reinstall without it. We stock the OEM foam gasket (Abatement Technologies part 8-0010-99) and the upgraded silicone version; we photograph the old gasket before removal, show the customer the gap it left, and install the replacement with torque-specified draw latches.
Our Abatement Technologies Duct Repair & Sealing Process
- 1
Visual and borescope inspection. We camera every duct run connected to the Abatement Technologies unit, starting at the equipment and working to the termination. The customer sees the feed live. Haven Standard Clause 1 requires the written price follows the inspection, not precedes it.
- 2
Failure mode identification and parts decision. We name the failure, cite the Abatement Technologies series, and specify OEM or quality aftermarket. For filter gaskets, we stock OEM. For steel transition sleeves on BD2K units, we fabricate in-house to match the original CFM spec.
- 3
Written scope and price, customer signature required. No work begins until the customer holds a document listing every repair, every part number, and the total. This is not an estimate; it is the price.
- 4
Repair execution with photo documentation. Every step is photographed: the failed component, the exposed cavity, the installed repair, the sealed joint. The before photo does the talking. We just bring the camera.
- 5
Negative-pressure test and airflow verification. We restore power, verify the Abatement Technologies unit achieves manufacturer static pressure at the inlet, and check for audible leaks with a stethoscope at every sealed joint.
- 6
Photo record delivery and 365-Day Done Right Promise activation. The customer receives all photos, the signed scope, and the written promise before we leave the driveway.
BeforeAfterWhat Abatement Technologies Duct Repair & Sealing Costs in Schertz
| Repair Scenario | Typical Range | What Moves the Price |
|---|---|---|
| Filter housing gasket replacement (PREDATOR/BD2K) | $180 - $260 | Accessibility of the housing, whether the filter frame is warped |
| Flex duct replacement (HEPA500 or PREDATOR remote inlet) | $340 - $580 | Length of run, R-value of replacement flex, attic vs. crawlspace access |
| BD2K inlet collar repair with fabricated steel sleeve | $420 - $680 | Extent of weld failure, whether the blower housing is also cracked |
| CAP600-UV ductboard plenum repair with escutcheon | $380 - $620 | Square footage of rot, need for plenum section replacement vs. local patch |
| Full supply plenum re-seal (mastic, tape, draw bands) | $560 - $940 | Plenum material (ductboard, sheet metal, fiberboard), number of branches |
These are whole-system prices, not per-vent teases. The price you sign is the price you pay. Call (830) 402-5110 for a free estimate - we’ll inspect, photograph, and deliver a written number.
Why Schertz Homeowners Call CleanRun Air Duct Cleaning Schertz for Abatement Technologies Work
We’ve worked the Schertz market long enough to know which Abatement Technologies units were installed by restoration contractors who left in 2019 and which were homeowner purchases that became permanent by default. That history matters when you’re deciding whether to seal a BD2K into the system or extract it properly. Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews. We also service Lennox, Trane, and Carrier systems, so when an Abatement Technologies unit is interfacing with a major-brand air handler, we understand both sides of the connection. Every job since 2013 has ended with a Documented Photo Record and a written price agreed beforehand. The 365-Day Done Right Promise is not a marketing line; it’s a physical document with a claim number.
FAQs
No, provided the repair addresses the duct connection and not the electrical or blower assembly. Abatement Technologies warranties the motor and HEPA media, not the field-installed ductwork. As an independent Abatement Technologies service provider, we document that our work stops at the equipment flange, and we note any existing warranty stickers before we start. If your unit is still under the original 2-year motor warranty, we’ll photograph the serial plate to preserve your claim path. Call (830) 402-5110 if you need help reading your warranty status.
Filter gaskets and standard collars we stock locally. Specialty items like the BD2K-15 replacement blower housing ship from Abatement Technologies in Suwanee, Georgia, in 3-5 business days. For most duct sealing and flex repair work, we don’t need OEM parts; we fabricate transitions and use mastic systems that exceed the original specification. If your job requires a wait, we tell you before you sign the scope, not after we’ve opened the unit. Call (830) 402-5110 to check current stock on your specific part.
Replace the unit if the blower motor is failing, the HEPA frame is cracked, or the unit has exceeded 8,000 run-hours with no filter maintenance history. Repair the duct connection if the unit itself tests within static and amp spec. We’ve seen PREDATOR 800s in Schertz with 12 years on the clock and clean blower curves because the ductwork was sealed correctly from day one. We test first, recommend second. The written scope will show both options if both are viable. Call (830) 402-5110 for that test.
You receive the photo record. Every sealed joint, every replaced gasket, every mastic application is photographed with a timestamp. Haven Standard Clause 4: Documented Delivery requires it. We also run a negative-pressure verification test and record the static reading. If the number doesn’t match the Abatement Technologies manual, we don’t close the job. The photos and the pressure reading travel with your invoice. Call (830) 402-5110 and we’ll show you a sample record from a similar job.
Properly sealed with mastic and draw bands, a residential Abatement Technologies interface should hold 7-10 years. The exception is attic-mounted flex duct in Schertz’s unconditioned attics, where summer heat accelerates rubber degradation at the clamp points. We inspect those clamps every 3-4 years as part of a standard HVAC service. If you bought your Schertz home with an Abatement Technologies unit already installed and don’t know the seal history, we recommend a borescope inspection now to establish baseline condition. Call (830) 402-5110 to schedule.
Ready for a written price on your Abatement Technologies duct repair or sealing? Call (830) 402-5110. A live person answers, we’ll schedule a free inspection, and you’ll have a documented photo record and a signed scope before any work begins. That’s Haven Standard Clause 1, and it’s how we’ve operated since 2013.
Written by Tomas Reyes, Owner & Lead Technician, CleanRun Air Duct Cleaning Schertz at CleanRun Air Duct Cleaning Schertz, serving Schertz and nearby areas.