Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterNikro Dryer Vent Cleaning in Schertz: What to Know First
We provide independent Nikro dryer vent cleaning in Schertz, TX, with most residential jobs completed in 90 to 150 minutes and a written price delivered before any work starts. Our crews carry Nikro-compatible tools from Nikro, Rotobrush, and Abatement Technologies, and every job ends with a Documented Photo Record of your vent interior, included as standard. If you own a Nikro dryer vent system in Schertz and need inspection, lint removal, rerouting, or bird guard installation, call (830) 402-5110. We’ll answer with a live person, verify your model if you know it, and schedule a visit with a written estimate on arrival.
How Nikro Products Fail - and How We Fix Them
- SL400 Series: Flexible duct collapse at the elbow. The SL400’s lighter-gauge flex duct, common in Schertz homes built 2018 to 2022, flattens at the first 90-degree turn when lint packs behind it. The camera shows an oval or pinched section that restricts airflow below 12 MPH. We replace the collapsed run with rigid aluminum where code allows, or spec a higher-grade flex with a wider bend radius if space is tight.
- SL800 Series: Corrosion at the exterior cap flange. Nikro’s SL800 uses a painted steel flange on the wall cap that holds moisture against the mounting surface. In Schertz, where Gulf humidity meets limestone-heavy soil that wicks water toward slab foundations, we see rust-through at the flange in four to six years. We install a stainless or polymer replacement cap, matched to the SL800 duct diameter, and seal with high-temp silicone rated for dryer exhaust.
- UV200 Series: Bird guard mesh fatigue. The UV200’s factory bird guard uses a finer mesh than competing brands, which clogs faster with Schertz’s cottonwood fluff in April and May. When the mesh loads, back-pressure rises and the dryer’s thermal fuse trips. We clean the guard if it’s intact, or retrofit a UV-compatible guard with slightly wider mesh spacing that still blocks starlings and sparrows.
- SL400 and SL800: Disconnected joint at the transition duct. Nikro’s clamp-and-foil transition design, used on both series, loosens with vibration from stacked washers in second-floor laundry closets common in Schertz’s newer subdivisions. Lint blows into the wall cavity before the homeowner notices longer dry times. We reconnect with a worm-drive clamp and add a support strap to isolate vibration, then photograph the joint from inside the duct.
- SL800: Lint adhesion to ribbed interior walls. The SL800’s corrugated interior, meant for flexibility, creates turbulence points where lint adheres in layers. Standard brushing skips the valleys. We use a Nikro-compatible rotary whip with reverse-bristle nylon heads, run at controlled speed, to lift packed lint without damaging the ribbed wall. The photo record shows the difference between brushed valleys and untouched ones.
Our Nikro Dryer Vent Cleaning Process
- 1
Model verification and scope. We confirm your Nikro series from any visible label, note the run length and termination type, and deliver a written price before touching the system. Haven Standard Clause 1: No exceptions.
- 2
Borescope inspection. Our technician feeds a camera from the exterior cap or interior transition, depending on access, and records the full duct interior. You see what we see before we proceed.
- 3
Parts decision. If a component needs replacement, we specify OEM Nikro or a quality aftermarket equivalent, explain the trade-off in writing, and note any warranty implications. As an independent Nikro service provider, we are not affiliated with or authorized by Nikro, so we source parts through verified HVAC supply channels.
- 4
Cleaning and repair. We deploy negative-pressure extraction with a Nikro-compatible HEPA collector, agitate with rotary tools sized to your duct diameter, and address any structural issues found during inspection.
- 5
Airflow verification. We measure exhaust velocity at the termination with an anemometer and compare to manufacturer spec. The number goes on your job record.
- 6
Photo record delivery and guarantee. Before-and-after images from your specific duct run, plus the written scope and airflow reading, are included as standard. The 365-Day Done Right Promise applies in writing.
BeforeAfterWhat Nikro Dryer Vent Cleaning Costs in Schertz
Most Nikro dryer vent cleanings in Schertz fall between $189 and $329 for a single-family home with standard access. Here’s what moves the number:
- Standard cleaning, accessible termination, up to 15-foot run: $189-$229
- Extended run (16-35 feet) or second-story termination: $239-$289
- Cleaning plus component replacement (cap, transition, bird guard): $269-$329
- Vent rerouting for code compliance or accessibility: quoted in writing after inspection
We do not quote per-vent prices or teaser rates. Every price is whole-system, agreed in writing before work starts, with no add-ons once the truck is in your driveway. Call (830) 402-5110 for a free estimate.
Why Schertz Homeowners Call CleanRun Air Duct Cleaning Schertz for Nikro Work
We’ve been working Schertz long enough to know which subdivisions have the SL400’s lighter flex runs and which older homes near the original downtown carry UV200 systems that haven’t been opened in a decade. Tomas Reyes, our owner and lead technician, brought two decades of ductwork experience from Queens to this market, and his crew operates under the H.A.V.E.N. Standard: background-checked, uniformed, identified by name before arrival. The before photo does the talking. I just bring the camera. Our equipment roster includes Nikro, Rotobrush, Abatement Technologies, Honeywell, Aprilaire, and Guardsman, and we also service Lennox, Trane, and Carrier systems when your home’s full HVAC picture matters. Every job carries the 365-Day Done Right Promise in writing, not as a policy subject to manager approval.
FAQs
No. Routine cleaning by an independent service provider does not void your Nikro warranty. The warranty covers defects in materials and workmanship, not maintenance. We document our methods and parts used so you have a record if a warranty claim ever arises. Call (830) 402-5110 if you need help locating your original warranty terms.
We source both. OEM Nikro parts are available through verified HVAC supply channels for most current series. For discontinued lines or when lead time matters, we specify quality aftermarket equivalents in writing and note any functional difference. Haven Standard Clause 1 applies: you see the price and the part description before we proceed.
Replacement is warranted when the borescope shows structural damage (corrosion holes, separated seams, crushed sections) or when airflow remains below manufacturer spec after thorough cleaning. We show you the camera evidence and explain both options with written prices for each. Most Schertz homes need cleaning, not replacement.
Every 12 to 18 months for a typical household of two to four people. In Schertz, homes with multiple pets or frequent towel loads may need annual service due to increased lint volume. We note your last service date on your job record and can schedule the next visit before we leave.
Call us at (830) 402-5110. We’ll identify the brand during inspection, check airflow regardless of manufacturer, and deliver a written price before any work. Our Free Second Opinion applies to any competitor’s written estimate you bring us.
Written by Tomas Reyes, Owner & Lead Technician, CleanRun Air Duct Cleaning Schertz at CleanRun Air Duct Cleaning Schertz, serving Schertz and nearby areas.